Computers and Technology

Easy to fix windows 10 error code 0xc0000185

windows 10 error code 0xc0000185

If the error is encountered, your computer ceases to function at the point you attempt to restart it. It will then take a while loading Windows after you’ve solved the problem windows 10 error code 0xc0000185. This problem can be resolved by following these steps carefully. Use these guidelines to fix the issue swiftly.

Problem

The Blue Screen of Death (BSoD) displays with an error code 0xc0000185, as the computer starts. The computer cannot start in Windows.

Cause

The computer is unable to communicate with the disk or the partition that holds Windows due to a damaged connection or the boot file aren’t in the system.

Solution

Below are some ideas for how to solve your BSoD Error Code 0xc0000185 issue.

Examine the connections to the Hard Drive

As we’ve mentioned previously, that the error code 0xc0000185 typically results from an untight connection with the storage device. It is the only way to find and fix this issue is to gain access to the hard drive after which you can connect or make the wires tighter by hand.

It’s performed through opening up the box located on the desktop of the computer. If it’s a laptop, you’ll need a laptop’s “service manual”. It is possible that you’ll be able find the PDF for your laptop by using the internet to search for it. It will assist you in accessing the laptop. It is important to also check the other cables when you’re there.

Make use of the command ChkDsk for running

  1. Click Windows key + the X > >Click on Command Prompt (Admin)
  2. In the Command Prompt window, type”chkdsk” or “R” and then press Enter.

HTML0 Additional Commands that Aid Windows Start Correctly

These commands fix the boot file which tell your computer the location of where operating systems reside. Making sure they’re not damagedor broken or missing could solve many Windows boot-related issues. Test these commands with your commands prompt.

  1. Click Windows Key + X > Click Windows Key+X >Click on Command Prompt (Admin)
  2. In within the Command Prompt window enter the command, then hit Enter. Enter.
  • Bootrec /scanos
    It scans for Windows applications on the device. This is helpful when the boot manager fails to offer any list of readily available Windows software.
  • Bootrec /fixmbr
    It creates its master Boot Record (MBR) on the partition of the system, not altering tables on the partition.
  • Bootrec /fixboot
    The program writes a completely new boot sector on the partition of the system, to repair the damaged boot sector that could lead to startup issues.
  • Bootrec /RebuildBcd
    It can also be used to repair boot files and solve issues caused by corrupted or damaged files.

Make use of System Restore in order to restore your System

System restore can restore your system to its initial condition. You can learn more about the process for system restore through clicking here.

Utilize Refreshing Your PC to fix Windows 8

In the event that none of those options appeals to you, you could take advantage of Windows 8. Its Windows 8 PC Refresh feature that comes with Windows 8 to do something like a speedy Windows reboot.

  1. Insert a Windows 8 or 8.1 installation USB or DVD, or recovery disk.
  2. Start the disk to open the set-up screen.
  3. On the Windows Setup screen, click Next.
  4. Click Repair your computer
  5. Within the Advanced Startup options choose troubleshoot
  6. Select to refresh your computer.

REBUILD BOOT CONFIGURATION DATE

    • Insert your Windows Installation Media disk and then restart your operating system.
    • When your device starts to boot after it has started you will be asked to hit any key you wish to start the device from the CD or DVD.
    • Select the correct date and then type in.
    • Click”Repair the computer” through”Repair your computer” by clicking the “Repair this system” button situated in the lower right-hand corner of the screen.
    • If you are within the “Choose an option” window, select the “Troubleshoot”
    • Then, from the “Troubleshoot” menu click”Advanced choices” “Advanced options”
    • Choose Command Prompt to begin the program.
    • Type BOOTREC/FIXMBR in the Command Prompt window.
      • Click on the Enter button on your keyboard.
      • Input BOOTREC/FIXBOOT and enter to begin this command.
      • Now, type your command as follows:

BOOTREC/REBUILDBCD, press Enter and then again.

    • Once the process is completed then remove it. After that, you can take off Windows Installation Media from the DVD or CDROM. Windows Installation Media from the DVD or CDROM.
    • You must reboot your PC, and then see if you receive an error that is similar to the one you got.

Popular blog – toshiba laptop blue screen on startup

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button